I'm always in awe of custom stones, markers and obelisks. Incredible work!

(Do you have a thread on that faux marble wall? 😅)

 

I'm always in awe of custom stones, markers and obelisks. Incredible work!

(Do you have a thread on that faux marble wall? 😅)

not yet for the marble wall. I need to make a few more sections for the epitaph wall so i may do a tutorial for that provided i can get more plywood.

 

I would love a wider angle shot of these so I could zoom and pan a little more . I kept trying to look farther to the left and right to see the other ones, too. Great work!

 

p with one, please share!

I'm not sure if it was one of your posts or somewhere else out on the interwebs, but I saw something similar a couple years ago. It got the interest of the then girlfriend, now fiancée, and I just haven't collected my thoughts and materials well enough to go on an attack for the project. Seeing yours in the photo grabbed my curious. If you do come up with one, please share!

Looks like a grid frame, and filled with custom epitaph panels? Backed with plywood I'm guessing as you mentioned you're needing more

Yes. I did do a post on it years ago. Its basically plywood panels cut to size with my deck (one side is higher than the other). Brackets to hang off the deck in the back then using 1/2 x 1" strips of wood for the grid. On the edge it has a half in over hang to attatch to the next panel so it is more or less seamless. Epitaphs just pop into place with double sided tape or you can glue them in place if you want. Fairly strait forward.