Halloween Forum banner

Zombie Swing Girl...suggestions needed

2022 Views 6 Replies 5 Participants Last post by  grlwalshy62500
Hi all,

I just purchased my first animatronic, the Zombie Swing Girl. I haven't set her up yet but I'm already enamored with her <3. My plan was to hang her from the tree in our front yard with a cover over the motor for protection. I realized as I was taking her out of the box however, that she was far too heavy for the spindly little branches ...*sigh* :(

So I'm wondering if anyone had any suggestions on other was to display her? Please keep the following in mind: 1. I have a VERY small yard to work with and 2. I'm not a handy andy (meaning attempting to undertake anything that would involve lumber, saws, joyces, etc. will be a fail).

Thanks in advance, I'd really hate to have to return her.
1 - 1 of 1 Posts

· Registered
1,775 Posts
you can get pvc pipe from any hard ware store such as home depot, menards, etc. It is pretty cheap also you will need pvc connectors they should be located by the pvc pipe. They also have a pvc pipe cutter that makes cutting the pvc pipe fast and easy. It looks like the pic.


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.