Halloween Forum banner

Wiper Motor for Coffin Lid

2343 Views 4 Replies 2 Participants Last post by  BCReaper
Hello All,

We are going to try and lift the lid of our coffin with a wiper motor. We have the wiper motor, and a power supply for it. We are looking for some direction as to how to attach it to the coffin, and make it functional. I usually just let the lid sit sideways, and have fog and a red light emanate from the coffin, but this year my nephew wants to attempt to lift the lid.

If anyone can provide the necessary steps, we would be very appreciative.

I know we are getting down to the wire for builds, but we have to give it a shot.

Thanks.

BCR
1 - 5 of 5 Posts
Here's the circuit I use to have my coffin lid open with a wiper motor - http://www.hauntforum.com/showthread.php?t=10832 and here's Otaku's thread with it opening the coffin lid - http://www.hauntforum.com/showthread.php?t=11632
Dear Halstaff,

I honestly am not sure how I forgot to thank you. I know it is VERY after the fact, but THANK YOU.

My apologies for not sending this earlier.

BCR
Dear Halstaff,

I honestly am not sure how I forgot to thank you. I know it is VERY after the fact, but THANK YOU.

My apologies for not sending this earlier.

BCR

No problem at all. In fact, this is perfect timing. The pick me up was a pleasant change!
  • Like
Reactions: 1
Well deserved...WELL DESERVED!

Might be tapping into your knowledge very soon BTW.

BCR
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top