Halloween Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
88 Posts
Skull fogger (walmart) electrical layout with relay

http://www.grimlabs.com/halloween/fogwire2.gif

This shows how to hook up a relay to use a fogger timer to run something of higher power. Eliminate the relay and wires going to the relay on this drawing for your purpose. You need to get insed the timer for what you want to do (and jumper the "fog" switch).

For myself, I modified a fogger timer with a relay to close the "fog" button when I pushed a "low voltage" button.
The schematic shows whats going on inside the fogger and inside the timer so you know where to jumper your relay into.

If you need more help...I can explain more.
 

· Registered
Joined
·
88 Posts
I tapped a relay across where the Manual FOG pushbutton goes (but left the timer together so it still works as normal). I can then disable the automatic part of the fog control and then just use the pushbutton. My relays are all back at the control box and I run the FOG line (110acv) to it as well as the 24V for the relay control.


I was thinking of something like this the doorbell is for
when I can trigger it and the relay is for when im not at the house.
But a light will go on in my controll board when a can manually use it.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top