Halloween Forum banner

Universal Joint - Free Moving Limbs

2273 Views 7 Replies 6 Participants Last post by  wristslitter
Universal Joint; this is a simple way to make a more freely moving armature. I used some cardboard tubing I found in the dumpster, four screws and round piece of ½ inch wood.

No need to explain step by step, just look at the photos they are pretty self evident. You could use thick walled PVC in you wanted.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.