Halloween Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
195 Posts
Discussion Starter · #1 ·
Universal Joint; this is a simple way to make a more freely moving armature. I used some cardboard tubing I found in the dumpster, four screws and round piece of ½ inch wood.

No need to explain step by step, just look at the photos they are pretty self evident. You could use thick walled PVC in you wanted.
 

·
The Big Kahuna of Fright
Joined
·
4,329 Posts
Innovative and very cool. If you're in an area where moisture is a concern, you will want to waterproof the arms. I recommend Thompson's Water Seal.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top