Halloween Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
220 Posts
Discussion Starter · #1 ·
Here are the videos of my Tiki Themed Haunt. There were supposed to be animations (a creep jumping out of the Tiki Bar and a moving Tiki skeleton) but I did not have time to get those working, had computer glitches and the tiki poles being the main attraction took priority. Also fog was supposed to come out of the tiki lights, not sure what happened there, but the fog stopped coming out. I will take some post video of the animations and post them later.


 

· Registered
Joined
·
220 Posts
Discussion Starter · #6 ·
I really like this! Especially the blacklight and foggers effects. We have too much light pollution from the streetlight to do blacklight stuff. :(
I had the same problem at the place I used to live at. My solution was to put a pinspot light (the type from those mirror ball kits) on a tripod and aim it at the photo sensor on top of the light. That would knock out the light for the night. Didn't receive any complaints and it was an area that there were no safety concerns of doing so.
 

· Registered
Joined
·
220 Posts
Discussion Starter · #9 ·
Here are some of things I had planned that weren't operating in the setup. The Tiki Bar was supposed to have an animation that jumped out, and the Tiki Torches were supposed to have smoke coming out of them. The condensation from the smoke/ fog fluid built up at the 90 degree elbows and prevented the fog vapors from exiting out the Tiki Torches. Learn something new every day. Here are the videos of the props working. Sound track is off a bit and didn't have time to adjust it.


 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top