Halloween Forum banner

The Wizard

1286 Views 7 Replies 6 Participants Last post by  PHD
Just thought I’d throw this in as well. This was a quick put together, a friend gave me the mask and costume, and I just had to build an armature. The base is 3/4 inch plywood, the 2 4x4's are cut and spaced to fit into the hole of a concrete block. Arms and elbows are posable by tighting the screws that are through the PVC joints. It was our greeter at the church’s haunted house. The cauldron was cut from the bottom of a plastic 50 gallon drum, great stuff, spray paint, handles are from 10 inch PVC pipe cut in 1 inch section. It will be animated with sound before 10/31/09.

Our pet duck did not like all of our stuff in her way.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top