Halloween Forum banner

Styrofoam boards for the front windows

2164 Views 7 Replies 7 Participants Last post by  ZombieTim
So today I decided to build some 6' boards to board up my front windows to the house....I still need to build a few more...I just hope they turn out allright in the end. This is the first two I have started so far


See less See more
  • Like
Reactions: 2
1 - 1 of 8 Posts
Meltyface - Looks good so far, a black base coat and then the dry brush top coat and you're ready.

Berserker - If you have brick you can use brick clips and fishing line to hold them in place. I also place a piece of foam on the vertical sides and use a #8 finish nail to hold them. On my Hardy siding I use cup hooks to attach the fishing line, they also make clips for vinyl siding. You can hot glue the horizontal boards to the vertical ones for more support
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.