Halloween Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Hi All,

I have the retired Spirit Halloween Grave Digger prop and it needs some repair. 2 issues:

1) The plastic piece that holds his head in place must have broke, and I can't find anything that will repair it (his head moves side to side and tilts, so can't glue)
2) His arm is supposed to move to point out to graveyard, but not working. I can here the mechanism in the arm moving so not sure if something popped out of place etc.

Is there anyone in NJ that fixes these things?

Thanks,
Rob
 

·
Registered
Joined
·
34 Posts
Not from NJ, however if you don't have the original piece for the head still, you might just have to improvize and take a flat piece of plastic from a binder or something and glue it in between the nech mechanism and the bottom of the head. For the arm, the problem is most likely a split motor shaft gear or a torn or missing rubber belt, and both of these things are easily replaceable and can be found on eBay.
 
1 - 2 of 2 Posts
Top