Halloween Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
448 Posts
Discussion Starter #1
I've had my current 400w fog machine for at least 10 years and this year I want to upgrade to a new one with a timer. I really don't need anything higher than a 400w and spirits is reasonably priced. Is there a hookup on their 400w fogger for a timer or not? Also, what's the best material to run fog from a machine up to a prop. I used piping insulation last year to connect it to my cauldron and found that the hot fog juice literally melted the foam.

Thanks in advance :D
 

·
Registered
Joined
·
244 Posts
Spirit's fog machines do have the ability to buy a separate timer, sold separately.

As far as moving fog to a prop, dryer hose works great and is completely heat resistant.
 

·
Registered
Joined
·
448 Posts
Discussion Starter #3
Good to know about the fogger, but for the tubing I need something a bit smaller. Something right around the size of 1.5 inch PVC would work, but obviously need it to be a bit more flexible.
 
1 - 4 of 4 Posts
Top