Halloween Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
216 Posts
Discussion Starter · #1 ·
I have it in my head that I would like to put a solar can light in my pumpkin head. I was thinking about having my hubby rewire the light cord to make it longer and then put the bulb in the pumpkin and the solar charger mounted on the back of the cross on the scarecrow. Has anyone done this? If so any tips or warnings?
Thanks (c:
Ellie
 

·
Registered
Joined
·
124 Posts
Totally doable. Just be sure the extension wires connect the LED pins to the same solder hole/wire that they were originally connected to on the board inside the solar light. Unlike incandescent bulbs, LEDs are polarized, and will not work if they are connected backwards.
 
1 - 5 of 5 Posts
Top