Halloween Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
Ok last year I learned that many people would not take the spooky path up to the house instead they would go up the driveway and to the front door. So I would like to add an air cannon like the ones I have seen on this site that uses a compressor and sprinkler valve. I have a reporter drive way alarm that I want to place by the garage door as the trigger, like this Reporter Wireless Alert System with Remote Sensor and Receiver : Target
. It has a 10amp output and I can silence the buzzer. I figure that could hook to the valve and open it to blast the air. I will hook this to my 35gal air compressor thats in the garage and use the regulator to tone down the air pressure. I just want to give a little something extra for those taking the easy way out. Is there anything you can see that is amiss with my design. Thank you all for your help.
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #2 ·
The output is AC so that may not work since I presume the valve is DC.
Is there a converter or controller I can use?
 
1 - 2 of 2 Posts
Top