Halloween Forum banner

Resin Tombstone Windproofing Help

775 2
I have all resin or thick plastic tombstones but man are they a pain to stay up. Last year I drilled a hole in the bottom and ran a 1/8 inch diameter metal stake in each side. However, many of them were too heavy and still snapped the metal with some wind. Does anyone have any ideas? Wind isn't crazy strong but I need more durable ideas to still maintain a graveyard a few weeks before the big days.

1 - 3 of 3 Posts

429 Posts
If drilling a hole hasnt solved the problem, some people glue a piece of pvc pipe to the back and then slide that over a piece of steel rebar hammered into the ground. That means thr rebar can be nearly the same height as the stone. Compromise is that you can see them from the rear, unless you make some foam covers for them.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.