Halloween Forum banner
1 - 1 of 1 Posts

· Banned
Joined
·
85 Posts
Had this thought and not sure if it would work for you or not .
After you remove the coils and all from the freezer/frige , take the coil and stretch it out and have it run , stretched out/straightened out inside a length of PCV pipe ( say , something like 2 inch ) , and remove the defrost heater from the unit . Allow the coils to frost over and freeze over and this is what the fog would come in contact with and use to cool it off. Keep the PVC small , so as to allow as much of the fog to touche the coil as possible , cooling it down .
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top