Halloween Forum banner

Pumpkin Faces stay dimly lit

584 Views 1 Reply 2 Participants Last post by  jpbaily1
I am a beginner, so please bear with me! I purchased a couple of light controllers and singing pumpkin faces from Animated Lighting last year. They worked great. This year I added a third face and a third controller. Now 2 of my faces that are controlled by one controller stay dimly lit even when the relays are off. The third face controlled by the third controller goes completely dark (as expected) when the relays are off. I know it only takes a little bit to dimly light these, but I didn't have this problem last year so don't know what to do.

Any ideas on what I may be doing wrong that is causing these to stay on dimly even when they are not "in use" by the song?

Thanks in advance for any help!!

1 - 2 of 2 Posts
Sounds like there is some residual voltage there. Have you measured the outlet with a volt meter to see?
I am not sure how that would be corrected though. I am sure that someone else here will chime in with the answer.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.