Halloween Forum banner

Powering multi Spirit props using DC power splitter?

794 Views 2 Replies 2 Participants Last post by  spinachetr
Anyone know if you can split power to several Spirit props using a DC power splitter normally used in security camera systems? Cable Wire Technology Electronic device Electronics accessory
See less See more
1 - 3 of 3 Posts
The issue would be amps. One spirit power supply is just enough to run one prop. 2 props one one spirit power supply would require more amps than the one power supply can output. This will lead to power supply failure. Next would be if you got one main power supply that had enough amps to run ( in this case eight props based on that photo ) would that adapter/splitter handle the amps going through it. Myself, I wouldn't risk it. Now if you were running all the props from a prop controller, and could guarantee that only one prop would be on at any one time, that's a different story.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.