Halloween Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
380 Posts
Discussion Starter · #1 ·
[
I have my frame all built looks to be working OK during testing. I'm looking to mount the head now and am wondering how the head gets attached to the amature? Most ive seen have a piece of PVC running through the neck. What keeps that from turning around and eventually just flying off? Could anyone who has built a casa fear style ground breaker please post a couple pics of how you attached the head to the armature.

Workbench Table Machine Furniture Electronics
Electronics Technology Electronic device Wood Machine
 

·
Registered
Joined
·
205 Posts
Pick up a couple foot piece of threaded rod and drill a hole in the center of the top middle piece. Secure it on the top and bottom of the center piece with multiple nuts. That will keep it from turning. Drill a hole through the center of a wig head and thread it over the rod and secure it with a fender washer and a couple nuts. Cut off any excess rod on top of the wig head.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top