Halloween Forum banner

Pneumatic controller

1061 Views 5 Replies 5 Participants Last post by  uncle
I am starting to build a five foot tall bat with wings that open up and flap. I am wondering how to control the air cylinders without having to do it manually. I would like to have it set up so it takes care of its self on cue. Is there software out there that will do this. Any help would be grateful.
1 - 1 of 1 Posts

· Registered
Joined
·
483 Posts
could be done with electric motor. Just be careful on the weight. You may need to run counter balances if it is to heavy.
Electric would be easier/cheaper. But I love air and if you get a programmer you could add a head turn or other movement

-PB
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top