Halloween Forum banner

Modified Home Depot Cat Skeleton

1122 Views 3 Replies 3 Participants Last post by  pir8p3t3
Picked up an inexpensive cat skeleton at Home Depot that had very basic animation. Replaced the stock cheezy red LEDs with yellow ones, covered each with a round blob of clear silicone caulk and then added a thin vertical pupil. Then added a second motor to animate the tail (which was the involved part of this project, requiring a lot of modification of the OEM circuit) and gave the skeleton the classic gel stain treatment. Below is a link to video of the finished product as it will appear in my graveyard:

  • Like
Reactions: 5
1 - 1 of 4 Posts
great job. And good call on those yellow eyes. Turned out really great
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.