Halloween Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter #1
As the title states, I have these components but I am having issues with VSA. I've tried all settings and nothing seems to work for me.
Pulse, Linear, dmx relay, dmx dimmer. Has anyone used this combination and if so can you pass along the VSA settings.

Thanks

Rich
 

·
Registered
Joined
·
38 Posts
i hooked up my servos yesterday and they work. havent hooked up the eyes yet

if i get to it tonight i will post back.

are you sure you hooked up the LEDs correctly?

out of the top of my head you should have the positive lead from your power supply connected to a resistor (value of resistor depends on your power supply voltage) then from the resistor to the common anode on the LED (long lead)

then connect the other 3 leads from the LED to 3 LED ports on the Medusa board

make sure that none of the LED pins are touching.

you can also check the output on the Medusa board with a voltmeter to verify if your issue is with the output or with the LED
 

·
Registered
Joined
·
63 Posts
Discussion Starter #4
Thanks, got it worked out. VSA had a hiccup, restarted the program and everything is working. Brian is a great guy, he helped me out big time last year with my problems, none better.
Thanks
Rich
 
1 - 4 of 4 Posts
Top