[texaslucky]

I am in need of a limbo stick and want it to be spooky like a Limb Boo stick. I just can't decide how to make it. Any ideas? It is for a kids party and will be out of either bamboo or pvc. I hsve been thinking about using the DT skelly hands but how can I get the stick to look like a bone?

 

[Deadna]

I think the joints of bamboo will look enough like bone joints once you paint it AND the skelly hands all the same color.

 

[texaslucky]

I was thinking that too. But I xant figure out how to attach hands without cracking bamboo. Any ideas? Thanks for ideas.

 

[scareme]

How thick is your bamboo pole?

 

[texaslucky]

It is one from DT-about 1/2 inch.

 

[Deadna]

Are you using just the big skelly hand or the hand/arm combo they have? The combo has a hole in it to slip the bamboo pole in. You can put a tiny screw into it to get a tight fit.

 

[printersdevil]

I have not seen the hand/arm combo. Ours only has the hands. Do you have a pic? I also just posted asking if you have or can get a photo of the witch crafts shown at your store. Thanks!

 

[Deadna]

Here are both side by side. The hand/arm is glow-in-the-dark and comes with a spike to push it in the ground.
http://www.halloweenforum.com/attachment.php?attachmentid=213284&d=1410068928

 

[printersdevil]

Ohh, I like the one with the hand and arm. It might work for the Limb-bo. I bought some of the smaller hand ones to use with props. I dug through them all and got enough that can squeeze by for the left and right hands. I may give them a quick burst of heat with the heat gun like someone posted here. I hope our store gets in the ones with the arm, too.

Texaslucky give me a call if your store gets those, too.