Halloween Forum banner

kit 74 and singing pumkins

2605 Views 12 Replies 6 Participants Last post by  djm902
hello i was just wondering how hard it is to use the kit 74 for singing pumkins.
also i would like to know, if there is better way of putting together this type
of prop
1 - 1 of 1 Posts

· Banned
85 Posts
Although a KIT74 is a good starter board , you will grow tired of it soon . It does have its disadvantages also .
1) there is no dimming capablities
2) its parallal connection , which means it has a limited distance from the PC to the KIT74 board
3) the clickity noise coming from the relays gets LOAD in a spot where you want only the sound of the prop/effect to be heard.

Now , there is lots of choices for both hardware and software other than what is suggested.

There are FREE software programs that will do the job , and there are ones you need to pay for . Based on what you need and how much you will use it , should help you decide which software for you to get .

Now , for the hardware . there is PLENTY of different boards out there that is MORE than capable of doing what you want . Most use either the serial port connection , or a USB connection , which , gives the user a LOT further distance from the PC to the board , AND , it allows daisy chaining as well .
Most of these boards having dimming abilities and are using solid state relays , rather then mechanical ones like on the KIT 74 board. ( which means less chance of failure , longer lasting and a LOT quieter . )
Now , you can go many different routes for hardware .
From cheap , DIY ( cheap as in cheap to build , not cheap as in crappy items )
up to the RTU (ready to use ) items , such as LOR , or AL , or lots of others .
AL and LOR both use their own software , which , is an additional cost for the software.
Then there is software , like VSA , which , also costs you money as well .
Now , I would suggest BEFORE bying ANYTHING . Get yourself a FREE copy of the different softwares available and play around with them , untill you feel comfortable with one ... then , hopefully , its one you can afford ( :) ) .
And then choose the hardware to fit what you want it to do .
Oh .. my bad ... there is another advantage of the KIT74 over the SSR style hardware .
The KIT74 can handle higher amperage per channel and total for the board , and can also handle things like transformers and motors without glitching . But ... again , the KIT74 can not dim lights / slow motors.
Now , gonna get a little deeper here . There are hockey puck style SSR's taht CAN handle motors AND slow them as well , BUT , these SSR"s are costly .
Now , these hockey puck style SSR's can be controlled by different hardware thru different software .
Good luck on your hunt for the "right" software and hardware .
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.