Halloween Forum banner
1 - 1 of 7 Posts

· Registered
96 Posts
Yes a picture would be helpful. So it seems like you want a half, or full standing prop have its right (our left) arm swing up and down? I can do this for you, Check out my website - DarkShadowshaunt.Com and Email me if your interested. All of my pneumatic props are built with 1 x 1 Steel tubing so it's very durable. Using alluminum would lighten it up but it's not as durable, also with steel you can get by with a MIG or Flux Cored welder verses a TIG which you need to weld aluminum.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.