Halloween Forum banner

I will show you mine if you show me yours.

5968 Views 48 Replies 12 Participants Last post by  Specter
No that’s not what I am talking about. What I am referring to is my Halloween prop control center. I live in the Arizona desert and we do not have lawns in our front yards. What we do have is a lot of rocks and very hard dirt.

That makes for some very difficult Halloween setup. So I have been working on this setup for a number of months.

The first picture show the control box without doors, you can see a number of shelf with different components. Each following pic moves down the inside of the control box.

Things of interest.

Keyboard with six switches above.
Two computers with KVM switch.
Six K74 boards
Six plugs on the outside / Wiring to the plugs outside
Orange wire below the plug, this will plug into a 220V line that will be split into two 110V circuits.
Outer wrap for power lines.
Black (Snake) (Thanks Randy for the name)) Prop power line.
The back of the box without doors.

More to come.

1 - 1 of 49 Posts
1 - 1 of 49 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.