Halloween Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Hi, thanks for the help in advance, I am trying to adjust the settings in VSA for the k74 parallel port board on lpt3. when opening the settings dialogue for the LPT relay I get an error " CParallelPort: error=wait timeout, m_io WritePending = TRUE "

VSA 5.0
lynxmotion SS-32
WIN 7 PRO 64

thanks, Solmann
 

·
BAD INFLUENCE
Joined
·
11,442 Posts
Try contacting Brookshire, that almost sounds like a conflict with the computer and the board? Are you using a real parallel port ? I have heard sometimes usb converters and virtual ports don't always work. Wish I could be more help.
 

·
Registered
Joined
·
16 Posts
Discussion Starter #3
Try contacting Brookshire, that almost sounds like a conflict with the computer and the board? Are you using a real parallel port ? I have heard sometimes usb converters and virtual ports don't always work. Wish I could be more help.
I loaded the (VSA) in to two different computers one with win 7 and the other win XP and get the same
 

·
BAD INFLUENCE
Joined
·
11,442 Posts
What are you trying to connect to? the Kit 74? In the column marked type ,do you have "LPT relay" selected? That seems to be what you need for the Kit 74 relay board. Check the devices under the Help section in VSA. Have you tried a different port? You show a ssc-32, can you connect to that in VSA? Again I would contact Brookshire to see if they can help you.
 
1 - 4 of 4 Posts
Top