Halloween Forum banner
1 - 1 of 1 Posts

· Registered
522 Posts
can you post a picture of the motor?

heat sinks are generally made out of aluminum or copper, and have fins to dissipate the heat.

The more fins, and the larger the fins the more heat that is dissipated. You can also use a fan to blow across the heat sink and cause it to dissipate heat more rapidly.

without seeing a picture of the motor, it is hard to say how to attach the heat sink.

it may be enough just to have a small fan blowing on the motor.

The oscillating the fan props have the same problem with the motors over heating when the fan blades are removed.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.