Halloween Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
510 Posts
Discussion Starter #1
Well all I need your input, I have built a frame and wiper motor set-up but it moves to much right to left. I just want it to go up and down but don't know the right linkage to use. I have tried several lengths of alluminum stock on the motor but I still get the same results. Does anyone have any ideas.
 

·
Registered
Joined
·
309 Posts
the closer the eye hook is to the motor the more side to side movement you will get. if you raise the eye hook up youll get less side to side. This is after you have the second linkage
 

·
Registered
Joined
·
156 Posts
Adding another linkage will eliminate that, but if you didn't want to put in the effort, why not just mount your mechanism perpendicular to the tombstone...then your side to side motion would be forward to backward. Done right, it'd be like a 'chin-up' motion.
 
1 - 6 of 6 Posts
Top