Halloween Forum banner
1 - 1 of 1 Posts

·
Registered
Fallen leaves and pumpkins
Joined
·
2 Posts
Discussion Starter · #1 ·
Here is a simple 2 bar lifter mech made from 2x4’s, aluminum, and steel bar-stock. I am building a skeleton that will jump above a tombstone. The clamps and wood scrap are only in place to show how it may look when my other parts are machined and installed. The prop uses a 1 1/16” Bore, 4” stroke cylinder from Frightprops and will be controlled by a Monster Guts PC-2 and will feature a relay controlled strobe. I will use foam board for the head stone and reinforce it with aluminum stock mounted to the frame. The valve is a cheap Airtac valve, but it works so it’s fine. I am waiting on some MAC Valves to ship and that will be the standard on all of my future characters. The burlap and vine thing is my scarecrow prop who is almost complete, but I will make a future and separate post about. Anyways, if anyone would like, feel free to tell me what I can add or improve. All tips welcomed! Happy Preparation to All Haunters :)
Electrical wiring Engineering Electronic engineering Circuit component Machine
 
1 - 1 of 1 Posts
Top