Halloween Forum banner

Grave Grabber Design (in-Progress)

3961 Views 8 Replies 8 Participants Last post by  wonderboy
Batfly gave me the idea to do this....

I have not built this yet, just mocked it up in 3D. If you want my measurements on this, let me know and I will put something together. I plan on building this later this month or the first of next month.

I plan on displaying this on a motion sensor with a strobe attached to the sensor as well.

If you build it, post it with results etc...





1 - 1 of 1 Posts

· Registered
Joined
·
389 Posts
I was just going to say the same thing. You need a small crank arm on the motor and the longer arm attached to the end of that. Did you do the design in Google sketchup?

EDIT: Meyers Madness... looking great! Can't wait to see it finished! I've been thinking about building one of these.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top