Halloween Forum banner

Fog Chiller Advise

598 Views 1 Reply 2 Participants Last post by  Dangleman
I am planning on building a couple of fog chillers this year and would like some advice. I am using standard 4" flexible dryer tubing and a Rubbermaid container. Is it advisable to start the tubing up high and loop it around so it comes out on the bottom or does it make a difference. Thanks for all of the help and ideas.
1 - 1 of 1 Posts

· Registered
37 Posts
I made the same chiller and i have it coming from the bottom to the top and it works fine but that kinda makes sense to start from the top since it rises when it comes out. Ill have to give it a try this year.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.