I built 10 sections of PVC pipe at 8 feet per panel. The problem is I used 3/4 PVC pipe and I ordered 120 1 inch finiales. The other problem is that these were ment to slide into a 1 inch opening instead of side over the top. I can not find plastic 1 inch finials that slide over. If you use 1/2 PVC you need 3/4 finials correct. Any other suggestions? I really want to use finials.
I think a 3/4" Coupling just maybe will work. Glue it to the one side and it should slide into it on the other. Though I'm not quite sure how it good it will look.
The 3/4 coupling units worked really well. Bought 120 of them heated them up and popped them in. Worked out great. Took about 2 hours doing 120 of them though.
Thanks for the help.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Halloween Forum
2M posts
83.4K members
Since 2002
Halloween forum - Keeping the Halloween spirit alive 365 days a year. Discuss decorations, costumes and more!