Joined
·
227 Posts
Not sure if this helps or not - I don't recall the relative dimensions of my PVC tubing and finials - nor can I remember where I found the idea.
Perhaps I am aging.
I used a heat gun to soften the top of the PVC tubing then squished the finial down over it. Once the PVC hardened, the finial was lodged onto it. No glue.
Cheers,
JD
Perhaps I am aging.
I used a heat gun to soften the top of the PVC tubing then squished the finial down over it. Once the PVC hardened, the finial was lodged onto it. No glue.
Cheers,
JD