Halloween Forum banner

Fence help needed. Finials.

Static: 
2K views 7 replies 6 participants last post by  Industen 
I built 10 sections of PVC pipe at 8 feet per panel. The problem is I used 3/4 PVC pipe and I ordered 120 1 inch finiales. The other problem is that these were ment to slide into a 1 inch opening instead of side over the top. I can not find plastic 1 inch finials that slide over. If you use 1/2 PVC you need 3/4 finials correct. Any other suggestions? I really want to use finials.
1/2" pvc use 1" finials to just slide over.
Otherwise you have to either dowel and peg, or use a heat gun to soften the pvc and slide the finial over, or drill the finial base and attach.

You can drill or heat with your sizing as it is now.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top