Halloween Forum banner

1 - 9 of 9 Posts

·
Undertaker
Joined
·
3,244 Posts
Discussion Starter #2 (Edited)
Electrical fence columns with flame style light bulbs. These are ready for final paint. The base is approximately 24 inches square and is made of wood.
 

·
Undertaker
Joined
·
3,244 Posts
Discussion Starter #7
Thank you Fog Master! I finished them but neglected to take a final completion picture. I have one of the final paint but without any lights ...DOH!
 

·
Registered
Joined
·
16 Posts
Electrical fence columns with flame style light bulbs. These are ready for final paint. The base is approximately 24 inches square and is made of wood.
Love to see the final pic's! Love your work! If you haven't already I would maybe rust up the lights and dirty up the glass so they don't look too new. To rust something new I spray it with rustoleum and when it's wet sprinkle very fine dry dirt (not sand) into the wet paint and then spray again lightly with rustoleum.
 

Attachments

·
Undertaker
Joined
·
3,244 Posts
Discussion Starter #9
I love your stuff...Very impressive! I did lightly rust up the columns, not nearly as much as yours. I didn't frost the glass, I left it to dirty up naturally. I'm hesitant to wreck the glass....
 
1 - 9 of 9 Posts
Top