Halloween Forum banner

Electrical Help!

2522 21
Well, the 2009 season is upon us. It's usually around July that I start thinking about the big day, and this year is no different.

This is a problem, though, that has been plaguing me since H'ween 2008. Last year was our first year in the current house, and we ran into a problem. I'm hoping that someone here will have a relatively simple fix to the challenge at hand.

It seems that all of our outdoor outlets (the garage, the front porch, and the deck in the back yard) are all on the same circuit. Where it gets interesting is if you go to the basement and check out the breaker box - the circuit comes off the box and goes directly into a GCFI, then splits off to the various external outlets.

The result? You guessed it. I can run 4 flood lights and a fogger before tripping the GCFI, and leaving the entire haunt in the dark. This year I've got three 400W foggers, and I have decided that I definitely need more lighting - preferably more task oriented fixtures to focus on individual props.

Does anyone have any creative ideas on how to remedy my dilemma? I don't particularly want to bring an electrician in to wire a dedicated Halloween circuit, but I'm a visual geek and I need my lighting!

Thanks!
1 - 1 of 1 Posts

· Registered
Joined
·
326 Posts
man, this is something I am looking into this year as well...I had to dot he "run and extension cord around the house and into the back door" thing because EVERYTHING outside and in the garage, as well as the basement, are on the same freakin' circuit! So as soon as my air compressor would kick on, POP! there goes the haunt. Luckily there were no issues on Halloween night, but I do not intend to tempt fate this year!!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top