Halloween Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi, i just sold my gemmy zultan on ebay and the buyer said that zultans head is shifted and now sitting on the crystal ball, does anyone know how to open a zultan up and reset the head? It is still talking but not moving, i hope it can just be set back in place. Directions would be greatly appreciated. Please help! Thanks
 

·
Registered
Joined
·
1 Posts
there are four screws in the back that hold the head in place. I had lossened them in my troubleshooting and the head fell. I just opened it up by taking the nuts on the top off, by loosening the nuts on the bottom corners. There ar screws from the top to bottom. My head is in place, but does not work.
 

·
Registered
Joined
·
3 Posts
on the bottom, by the feet you will find a nut, or cover. Also on all four corners on top. Take the nuts/covers off top and bottom. Grab the bars with needle nose plyers on the bottom and pull down all four bars. The top will now come off. DO NOT take the screws out of the back, his head will fall off!
 
1 - 4 of 4 Posts
Top