Halloween Forum banner

Cable for Phono Plugs - 12V

858 Views 5 Replies 5 Participants Last post by  David_AVD
Hi all

Last year I saw a post where someone had made a 'plug and play' style setup for 12volt LED's using phono plugs. Last year I had a go using grey speaker wire and worked ok.

This year I would like to replace the grey speaker wire with black coloured cable. I'm trying to find (with no success) 2 core black round cable which I can solder to a phono plug which I believe cannot be greater than 4.5mm OD. I would also like to activate a solenoid[SUB][/SUB] with the same cable.

Had anyone got any recommendations or can point me in the right direct for such cable? (I'm UK based)

Many thanks
1 - 1 of 6 Posts
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.