Joined
·
71 Posts
Tried my hand at making a bed of coals for my corpse on a spit.
Here goes!
Items needed:
1 2x8 .5" plywood
20' 2x2's
Screws
Saw
Drill
1" bit
Great stuff
Flat black spray paint
$1 skulls
Lights of your choosing
S
Clear solo cups (9oz & 16oz)
Hot glue gun & sticks
Dremmel for cutting out skull mouth(razor knife can be used)
Grabbed some plywood and laid future corpse out for dimension.
Cut plywood and 2x2's
Assembled
Cut mouths out and drill 1" hole in back of skull(for lights)
Skulls laid out plywood marked and ready to drill plywood(1" hole)
Skulls and cups laid out for hole locations
Drilled deck for solo's (few errors, np...foam will cover)
Gluing Skulls on and drilled eye sockets
Glueing Solo's (just secure them, foam will hold them in place)
Foamed in skulls and small cups first(might not matter, did it so that I could have some foam height on 16's w/out over doing it. Foam can get to thick for light penetration.
Finished foaming
Now it's time to run lights! (i had some dim ones and I must have put in 500+) Can't wait to see leds in something like this.
Laid the corpse on after running lights...Good fit
Painted foam and skulls again.
First layout
Final position. The hands holding his head just cries PAIN
Will try and get a night shot soon.
Peace
Here goes!
Items needed:
1 2x8 .5" plywood
20' 2x2's
Screws
Saw
Drill
1" bit
Great stuff
Flat black spray paint
$1 skulls
Lights of your choosing
S
Clear solo cups (9oz & 16oz)
Hot glue gun & sticks
Dremmel for cutting out skull mouth(razor knife can be used)
Grabbed some plywood and laid future corpse out for dimension.
Cut plywood and 2x2's
Assembled
Cut mouths out and drill 1" hole in back of skull(for lights)
Skulls laid out plywood marked and ready to drill plywood(1" hole)
Skulls and cups laid out for hole locations
Drilled deck for solo's (few errors, np...foam will cover)
Gluing Skulls on and drilled eye sockets
Glueing Solo's (just secure them, foam will hold them in place)
Foamed in skulls and small cups first(might not matter, did it so that I could have some foam height on 16's w/out over doing it. Foam can get to thick for light penetration.
Finished foaming
Now it's time to run lights! (i had some dim ones and I must have put in 500+) Can't wait to see leds in something like this.
Laid the corpse on after running lights...Good fit
Painted foam and skulls again.
First layout
Final position. The hands holding his head just cries PAIN
Will try and get a night shot soon.
Peace