Halloween Forum banner
1 - 2 of 2 Posts

·
1031 Props
Joined
·
1,052 Posts
Discussion Starter · #1 ·
So i made a Bleeding Tombstone for a side job and at first it was working fine. I brought it over to the customers house and set it up. A few hours later i get a call saying that the tombstone is bleeding out and almost all of the water is gone. So the next day i go there and try to mess around with it because the land its stting on isn't level so i figured that was why it was bleeding out the first time. I level it out with some pieces of wood and fire it up again. By the time i leave the thing is running fine for almost 10 minutes with no water missing. So i leave and assume i fixed the problem. Later on i get a text saying its bled out again. So i told them to set the tombstone up on level ground and try it again. I figured it worked on level ground by me so it should work there...WRONG. Its still bled out. I checked the reserve box for leaks and i have none. So somehow the water is missing the reserve tank and running out the side. I tried installing a gutter made out of a piece of PVC pipe cut in half with multiple holes drilled in it and it seemed to be working on level ground. So i tried tilting it to resmeble the slope of the customers front lawn. Sure enough it started to leak all over the place. So my question now is what do i do to fix the problem? I was thing about going and actually buying a piece of gutter and installing that to catch all the water so that nothing can run out anywhere except for back into the reserve tank. This is my first bleeding tombstone and its making me crazy so any and all help is greatly appreciated.
 

·
1031 Props
Joined
·
1,052 Posts
Discussion Starter · #2 ·
just gonna refresh this.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top