Halloween Forum banner

1 - 20 of 46 Posts

·
Hauntless
Joined
·
8,332 Posts
JustWhisper was my Secret Reapee and she had a wonderful 'like' - pirates! Always made a tombstone for my SR's gift and was thrilled to have the challenge of making a pirate tombstone. This is a tutorial of how to make your own. Note: This is a small stone design because it had to be shipped to JustWhisper. You may want to scale this larger for your graveyard. The stone's dimensions are 28" tall, 17" wide and 13" deep.




A great way to dive into the tutorial is to watch the video:



Materials Needed:
1 1/2" pink or blue foam (about a third of a sheet)
17" x 13" plywood
Printer paper
Tape
Latex Drylok - gray or tinted gray
Foamboard glue
Acetone
Wood filler
Blackbeard's sword (Sword of Triton): https://www.buycostumes.com/products/pirates-of-the-caribbean-5-sword-of-triton
Plastic gold coins
Fake seaweed (used Weeping Willow greenery): https://www.hobbylobby.com/Floral-Wedding/Bushes-Garlands/Greenery/Green-Weeping-Willow-Hanging-Bush/p/4316
Hanger wire
1/2" PVC pipe (24" total)
DAS clay
Paper towels
Monster mud
Dark gray exterior latex paint - flat
White exterior latex paint - flat
Red acrylic paint
Black acrylic paint - flat
Raw sienna acrylic paint
Dark green acrylic paint
Glue sticks
Two 22" rebar rods

Tools Needed:
Jig saw
Mask
Eye protection
Sharpie
Ruler
Photoshop-type program loaded on computer
Rasterbator type program loaded on computer
Adobe Reader program loaded on computer
Computer printer
Ruler
Ballpoint pen
Blue painter's tape
Dremel with Multi-purpose cutting bit attachment
Multi-Max dremel with wood cutter attachment
PVC cutter
Sanding pads
1/4" & 1/2" drill bits
Drill
Paint brushes
Paint scraper
eXacto knife
Tray for working clay
Caulk gun
Hot glue gun
Needle nose pliers
Wire cutters
Misc. sculptor's tools (usually comes in a kit): https://www.michaels.com/artminds-clay-tool-set/10356851.html
Stanley SureForm Shaver
Stanley SureForm replacement blade bits
Misc. sized brushes including a 3" and 2" angle brush
Plastic cup
Non-reactive plastic container
Painting tarp
Latex gloves
Q-Tips
Tin Snips
Ground stakes
String
Wood planks for leveling (optional)



Design Tombstone Face & Epitaph (picture 1): Design the tombstone face in a Photoshop-type program. The design uses an image of an opened scroll as background and another image of a map pasted over it. Use text boxes to create and adjust the sizes of the epitaph. What's great about using Photoshop is you can move the layers around and change shapes easily to make your tombstone just as you want. The picture dimensions in Photoshop is 24" tall and 15" wide. Note: In the next step, after printing, the image size printed out to be 23 1/4" x 14 1/2". Close enough...

Rasterbator (not pictured): Rasterbator (stop snickering!) is a free software program that makes huge rasterized (poster-sized) images from any image. You can then print it out on regular printer paper and tape back together. Once the program is open, upload your .jpg image. Change the setting for Standard Paper Size to US Letter. Next, change the setting Define Output Size to 1.5 pages wide. Set Rasterbator Options to a Dot Size of 1mm. Then hit Rasterize. It will make your .jpg into a printable .pdf file. When printing in Adobe Reader, choose Page Scaling: Fit to Paper at the options window that comes up. If you choose horizontal paper alignment, also make sure Auto-Rotate and Center is selected. Now print out and tape back together.

Cut Foam (picture 2 & 3): First off...always wear a mask when cutting/shaping foam. The foam dust floats through the air like crazy. Lay out the Rasterized printout moving it up 3" from the edge of your foam to allow room for the bases of the tombstone (two stacked 1 1/2" pieces=3"). Cut it out with a jig saw. Flip the cut piece over and trace out. Cut out.

Measure out two bases that are 17" x 11" and cut those out. In the center of those bases cut out space for the tombstone to slip through (14 1/2" x 3").




Mock-up: Put all the pieces together to decide how you'd like them on the stone.



Mark Boundaries (not pictured): Mark off the top and bottom boundaries of the scroll while the paper is still on the stone. That way you won't carve those sections away.

Shape 'Map' (picture 1): Use the Stanley SureForm Shaver and bits of the shaver to gouge and shape the face of the stone so it curves like an open scroll map. Be sure that you don't carve too far into the stone. There must be room left for the interior PVC channels. Do the front side only and put back into the base for the next step.

Shape other Side (picture 2): Draw a line for what needs to be carved away on the other side using the carved side as a reference. Remove from the base and carve the other side.



Sand Surface: Very lightly sand the surface to get it to look more like smooth map parchment.



Dremel out PVC Channels: Cut two lengths of 12" PVC pipe. Place them both on one opened side of a tombstone face so they are equally distant but not too close the edge. Keep them as vertical as possible. Move them down 3/8" to allow them to protrude into the plywood base you will be using for the tombstone. Trace the PVC pipes with a marker. Cut the area out using the multi-purpose cutting attachment for the Dremel just halfway deep. You will be doing the same thing on the other side, so the pipes will be in the center of the stone. Place the PVC pipe into the hollowed channel and apply some paint to the top. Grab the other tombstone face, flip over and center over the matching one and press down. This will leave paint markings where you can easily trace out the channels for the other side. Cut that side out also.



Trace out Design (picture 1): Use painter's tape to attach the design to the stone. Trace out a section with a ball point pen, remove one side of the tape and lift the paper. Retrace the impression left with the pen again to make a clearer line. You will have to do this in sections because the impression left by the pen starts to fill back in after a while and becomes hard to see. Remove the paper when all finished.

Fill in (picture 2): Fill in any complicated designs with a marker so you won't lose your place while Dremeling out.

Dremel out Pattern (not pictured): Use the Dremel with the multi-purpose cutting attachment to cut out. For very small or detailed fonts, go shallower. If not, the centers of 'e' , 'o' and 'a' would flake off.

Continued...
 

·
Hauntless
Joined
·
8,332 Posts
Discussion Starter #2 (Edited)
Mark Boundries (not pictured): Mark off the top and bottom boundries of the scroll while the paper is still on the stone. That way you won't carve those sections away.

Shape 'Map'
(picture 1): Use the Stanley SureForm Shaver and bits of the shaver to gouge and shape the face of the stone so it curves like an open scroll map. Be sure that you don't carve too far into the stone. There must be room left for the interior PVC channels. Do the front side only and put back into the base for the next step.

Shape other Side (picture 2): Draw a line for what needs to be carved away on the other side using the carved side as a reference. Remove from the base and carve the other side.







Sand Surface: Very lightly sand the surface to get it to look more like smooth map parchment.









Dremel out PVC Channels: Cut two lengths of 12" PVC pipe. Place them both on one opened side of a tombstone face so they are equally distant but not too close the the edge. Keep them as vertical as possible. Move them down 3/8" to allow them to protrude into the plywood base you will be using for the tombstone. Trace the PVC pipes with a marker. Cut the area out using the multi-purpose cutting attachment for the Dremel just halfway deep. You will be doing the same thing on the other side so the pipes will be in the center of the stone. Place the PVC pipe into the hollowed channel and apply some paint to the top. Grab the other tombstone face, flip over and center over the matching one and press down. This will leave paint markings where you can easily trace out the channels for the other side. Cut that side out also.










Trace out Design (picture 1): Use painter's tape to attach the design to the stone. Trace out a section with a ball point pen, remove one side of the tape and lift the paper. Retrace the impression left with the pen again to make a clearer line. You will have to do this in sections because the impression left by the pen starts to fill back in after a while and becomes hard to see. Remove the paper when all finished.

Fill in (picture 2): Fill in any complicated designs with a marker so you won't lose your place while Dremeling out.

Dremel out Pattern (not pictured): Use the Dremel with the multi-purpose cutting attachment to cut out. For very small or detailed fonts, go shallower. If not, the centers of 'e' , 'o' and 'a' would flake off.






Glue Tombstone Face: Glue sides and PVC together using foamboard adhesive. Weight the top while curing.







Mark Plywood (picture 1): Put the tombstone face back into the foam bases. Center it on the plywood so there is even space in the front and back. Trace a line around the stone with a marker. Remove the tombstone and put on it's side. Apply some paint where the PVC is. Lift up the stone and center it over where those lines are and press down. It will leave a paint impression showing you where holes need to be cut out of the plywood.

Cut Plywood (picture 2): Drill out a pilot hole your jig saw can fit into to cut the circle out. It's hard to drill out a 1/2" hole first so start by using a 1/4" drill bit then switch to the 1/2" drill bit. While you are making these holes, also put two in the far diagonal corners. These holes are later used to tie off your stone to ground stakes. This helps add more wind protection and helps it defend against burglars when out in your graveyard. Use the jig saw to cut out the larger holes for the rebar/PVC hole.







Harness for Sword: Insert the sword back into the stone and move around until it's right where you want it to be. Take a length of hanger wire and push into the seam of the stone. Bend with needle nose pliers to adjust into a good place where when the sword is permanently placed in the stone, the wire will be fairly hidden from view. Remove the sword but leave the wire in place.








Glue base: Glue the bases and tombstone face to the plywood one by one starting from the bottom. Use the same foamboard glue to 'caulk' any open seams. Weight down and allow to dry overnight.









Design Coral Base
(picture 1): Cut out a circle from paper and trace out over and over again onto the base.

Chip out (picture 2): The Multi-Max Dremel was great for this. Chip out the circles.

Smooth (picture 3): Use a grinding stone attachment (part 952) for the regular Dremel to smooth away the rough edges.







Continued...
 

·
Hauntless
Joined
·
8,332 Posts
Discussion Starter #3 (Edited)
Make Cracks: Mark out 'crack' lines on the stone. Use a pick or a tool that will allow you to cut/pick a thin 'crack' into the stone. I used a tool from the sculpting tool kit.








Apply Acetone: Place some acetone in a non-reactive plastic container and brush it onto the cracks and any blemishes that are already on the stone. This will open them up and amplify damage. The way it eats into the stone looks like what weather would do to stone over the decades of time. Be sure to wear a good mask and eye protection as a precaution.








Fill Seams: Fill any seams and cuts you don't want in the foam. Wear gloves and dab some filler onto a fingertip. Press into the seam and feather away using your gloved finger. It is easier to smooth the wood filler while wet. It's very hard to sand dried wood filler on foam. The sand paper tears up the foam too easily. Let dry overnight. Check the next day to see if there are any raised ridges. Use a smooth metal tool to burnish down. Had used one of the sculpting tools. Also check to see if any filler had shrunk down too much and use more to fill.







Apply Barnacles: Google some good pictures of barnacles to use a reference. Wet some DAS clay on a tray and knead to get fairly wet (loose). Place a small grape-sized glob onto the stone. In the sculpting tool set there is a tool that has wires at the end. Bend them to one side and fan out. Dip the tool in water and then press the DAS clay on the edges to make them smooth away onto the stone. It will make the glob look like a volcano. Grab the sculpting tool that looks like a needle, dip in water and use that to stab into a side of the interior of the barnacle to separate the inside from the sides. Keep stabbing until you start to get a pea-sized creature in the inside. Finally stab the center of the creature so it's halved like a clam. Repeat until you get nice groupings of barnacles being sure to change up the sizes of them. Just like in nature.









Prepare Coins (picture 1): Mock-up placement of coins so it looks like they are being absorbed by the stone. Two options here: You can cut the coins in half using a tin snip or you can cut a scar into the foam and insert them. The latter step is shown near the end of the tutorial. It's also the way I suggest. They will be much stronger inserted into the stone.

Monster Mud Coins (picture 2): Dip the coins into monster mud and place on the stone. Use a large brush to press the coins and smooth away the mud. Have a scraper nearby to help clean the brush of excess mm. Keep doing this until the mm makes the coins have a nice transition to the stone. Dip the brush into some water and carefully and gently wash away some of the coin face so you can still see the raised ridges of the design. Also use the brush dipped in water to help smooth away the edges of the monster mud. Let dry overnight.









Caulk and Drylok Bottom Base (not pictured): Turn the stone on it's side and caulk the opening where the PVC pipe meets the foam and plywood so only the interior of the pipe is open. Allow to dry overnight. Paint a layer of Drylok on the bottom of the base and allow that to dry overnight. Next day, do a second coat of Drylok and let dry overnight again.

Coat with Drylok (picture 1): Turn the stone right-side up again. Coat entire stone in Drylok. This step takes longer than you think though. The epitaph gives you some painstaking work. For tiny fonts you will need to press the Drylok in and then scoop the extra away using a tiny brush. It will take repetitive passes. For large fonts it will also take many passes to scoop out the extra Drylok. The font will fill in and disappear because Drylok is so thick if you don't do this step. To help pass the time - pour a drink first.

Second Coat (picture 2): Paint a second coat of Drylok.









Painting Crevices and Epitaph (not pictured): Using a small brush and dark gray exterior paint, paint the inside of the epitaph. Use a larger brush to paint the crevices but also feather out to the edges. This will help to add depth to those cracks and crevices. No need to allow full drying for the the next step. As long as it's partially dry in spots you can move to the tea-staining step.

Tea-staining: This is a very messy step so put some painting tarps on your workbench. Dip a 2" brush into the dark gray exterior paint and mix into a 1/2 filled glass of water. You are making paint that is like tea. This will let you stain the stone so it looks like it's been out in the dirty air for centuries. Start at the top and roughly drip it down the tombstone and help brush it down in places. Do it over and over again until you like the look. You are trying to make it look like this stone has been in the weather forever. You can take breaks here and there to allow the previous tea-stain to dry a bit. If you do this you will see more definitive lines. If you don't take breaks then the lines will be muddier looking. It's all your preference. For this stone I took very short breaks so you get a bit of both. Muddying and definitive lines.

Sop up any excess paint with paper towels. Use small items under the the base to prop it up and allow air to flow underneath so it can dry. Dry overnight.










Red Accents: Thin out red paint and wash some red color where the footsteps and treasure 'X' is.








Dry-brushing: A miracle step. Get a dry 3-inch brush and dip it in white exterior flat paint. First brush it dry on a paper towel. Lightly brush the entire tombstone. This will paint only the raised edges of the tombstone and you will be amazed at the transformation. Instantly your tombstone will look like real stone.





Continued...
 

·
Hauntless
Joined
·
8,332 Posts
Discussion Starter #4 (Edited)
Attach Sword: Put some foamboard glue into the opening for the sword and glue the sword in. Use the foamboard glue to also 'caulk' the edges of it. Q-Tips are good here to wipe away excess glue. Bend the wire in place to anchor the sword. Cut away any excess wire.









Attach Gold Coins: Use an eXacto knife to cut a slot for the coins to slide into. Take a sculptor's pick to pick out some foam to make room. Add some foamboard glue and glue the coin in place. For a coins that's just resting on the outside of the stone - just glue the back of it to the stone. You can use the foamboard glue for that.









Lichen & Moss Color Accents: Raw Sienna is the perfect orangy color to add a rust-colored lichen look. Dip the 2" brush into the paint and brush off excess onto a paper towel. Streak the paint down in some areas of the tombstone. Prepare your brush the same way using the dark green paint. Pick a few places that a spot of moss would look good. Don't streak it down though. Just a quick, short, downward brush stroke.

White Lichen and Bird Droppings: Place some white exterior paint on your pallet. Get a crumpled up rag or paper towel and dip into the paint and dry off a bit on another paper towel. Dab the tombstone a couple of times in the same spot while turning the rag until you get the look you want. Dip a small brush into the white paint on the pallet and brush on some bird droppings.









Drylok & Drybrush Visible Glue: Cover up any visible glue seams with some Drylok. Let dry and then quickly drybrush with white to help blend it back into the stone.









Black Detail Lines: Paint a very thin line in the center of any cracks on the stone. Use flat black paint for this. Extend the line past the real cracks to make a faux crack on the edges. This adds realism. If the shade of black isn't dark enough it won't be convincing so you may need to go over your line twice. Paint a line across the center and outside perimeter of the creature inside the barnacles.

Fix Dark Areas: Sometimes the tea-staining step will wash away some of the dark crevice paint details. Go back over any areas that needs additional shading with a brush.









Apply Seaweed: Apply some seaweed to the stone using a hot glue gun.











Animateblackbeard.jpg
Whew! You are done! Step back and admire your new creation










Display in Graveyard: Lay the tombstone on it's side where you want it in your graveyard. Line up the two rebar stakes where the holes are in the center of the tombstone. Pound the rebar 10" in the ground. Lift up the tombstone and slide over the rebar. This will help keep your tombstone upright on windy days. If your yard is sloped, use a plank or two of wood to shim up the bottom so it's level.

Lace some string though the holes in the far corners of the tombstone and tie off to ground stakes. In a few days the grass will camouflage the string and becomes nearly impossible to see. The ground stakes add additional wind resistence and some theft deterrent.




Thanks for checking out the tutorial
 

·
Registered
Joined
·
16 Posts
WOW Terra!! Simply Amazing....;)
 

·
Registered
Joined
·
13,639 Posts
Wow Terra that's an amazingly detailed stone. I love your composition and the use of the sword, gold pieces and " seaweed" to make it appear even more realistic. Your YouTube video was very helpful in seeing it come to life.

Oh and great barnacles!
 

·
Registered
Joined
·
37 Posts
Terra,
I truly enjoyed watching you create this stone. So much in fact I couldn't wait to try my spin on it. I hope you don't mind.
I will have some pictures taken of it this weekend and will try and post it. Like the one you made, this is a gift for my sister who has a wonderful
Halloween party every year and I have been helping her with the props. This is my first attempt at doing something like this so I hope I
did it justice.
 

·
Registered
Joined
·
719 Posts
The base stone's sculpting looks amazing! It looks like rock that's just chiseled or broken away, as opposed to working a smooth stone surface. If you have any extra photos of that technique, please add them here!
 

·
Hauntless
Joined
·
8,332 Posts
Discussion Starter #13 (Edited)
absolutely beautiful. :) and great tutorial. :)
Thanks Cathy!

Gorgeous! Thanks for the how-to Terra! :D The crack detailing will come in handy shortly while finishing my Celtic cross. ;)
Yeah, my old tombstone cracks never convinced me they were real. The black line helped a lot.

I'm in total awe! This is such an amazing tombstone! The level of thought and detail you've put into it really makes it stand out. Excellent tutorial! Now I have to figure a way of fitting something like this into my haunt - maybe one of the Blackstone ancestors went to sea? :)
Appreciate that. This was a fun one to build. Beginning a new love - for pirates :)

Looks fantastic, Terra! Another masterpiece!
Thank you Dave. You treating my car good? heheh.

WOW Terra!! Simply Amazing....;)
Glad you like it!

Wow Terra that's an amazingly detailed stone. I love your composition and the use of the sword, gold pieces and " seaweed" to make it appear even more realistic. Your YouTube video was very helpful in seeing it come to life.

Oh and great barnacles!
Glad the video was helpful. Wasn't sure if I should record the build or not because already have a tombstone tutorial but thought the whole build video would help others to see the entire evolution. Currently editing a second video showing the Doc Holliday (western themed) tombstone. Hopefully done in two weeks or so.

Terra,
I truly enjoyed watching you create this stone. So much in fact I couldn't wait to try my spin on it. I hope you don't mind.
I will have some pictures taken of it this weekend and will try and post it. Like the one you made, this is a gift for my sister who has a wonderful
Halloween party every year and I have been helping her with the props. This is my first attempt at doing something like this so I hope I
did it justice.
No problem. Just Whisper was very cool about having me post a tutorial. Thanks again JW!

The base stone's sculpting looks amazing! It looks like rock that's just chiseled or broken away, as opposed to working a smooth stone surface. If you have any extra photos of that technique, please add them here!
Surprisingly, I don't have any more pictures of the part (usually take boatloads). Happy to answer any questions you may have about it.
 

·
Hauntless
Joined
·
8,332 Posts
Discussion Starter #14
The base stone's sculpting looks amazing! It looks like rock that's just chiseled or broken away, as opposed to working a smooth stone surface. If you have any extra photos of that technique, please add them here!
I went back through the videos and cut this short video to show more of how it was carved:

Want to thank you as well. Been procrastinating on creating a new YouTube channel to hold short little videos like this. It's called TerraLair :)
 

·
The Mrs. to a MysterE
Joined
·
2,337 Posts
LOL "Stop snickering...." Well - you have done it again. ANother amazing stone with a special twist. We visit the OBX of NC each summer and folks still believe that Blackbeard's treasure is buried somewhere on Ocracoke Island. Luv how you built in the Spotswoode aspect. Hallow-storians will get a kick out of that for sure. Splendid. You can be my SR next year! ;)
 

·
Registered
Joined
·
502 Posts
Very nice work Terra! I love your attention to detail. I see that I need to add a dremel tool to the Christmas list. Thanks for the tut!

PB
 

·
Registered
Joined
·
719 Posts
AAAAAAH!!! You cleaned it up a bit with a Dremel afterwards! I thought using that electric chisel seemed rougher and more aggressive than what your results looked like, but using the Dremel to smooth it over carefully is what I was looking for. NICE.

Damn fine work, as always!
 

·
Registered
Joined
·
37 Posts
Ok Here goes.

Just remember this is my first attempt at this, but please don't hesitate to tell me what I could do to make it better.
Looking at it now I still see the pink foam board inside it. This has always been my problem when making anything.
Plus this is the first pictures I have posted so I'm still learning this as well. Dad's Crafts 001.jpg

Dad's Crafts 005.jpg

Dad's Crafts 003.jpg

Dad's Crafts 004.jpg
 

·
Hauntless
Joined
·
8,332 Posts
Discussion Starter #19
WOW! That's amazing work. I first thought you sneaked over to JustWhisper's house and took some more pictures of it. Most excellent!

I understand the difficulty of covering up all the pink. That second coat of Drylok helps a lot but you have to go close with a tiny brush to make sure. Even then, don't ever turn it upside down or something. That's when you really notice spots missed, LOL! The epitaph is the hardest because you need to scoop a lot of the Drylok out to keep it still visible so you end up with just a thin coat of Drylok. But, when you come in with the dark gray paint it's usually gets good coverage.

Again, fantastic. Are you going to do the seaweed later? Not a biggie. It will just add some color. But, if you want a somber, spooky graveyard then it's not necessary.
 

·
Hauntless
Joined
·
8,332 Posts
Discussion Starter #20
LOL "Stop snickering...." Well - you have done it again. Another amazing stone with a special twist. We visit the OBX of NC each summer and folks still believe that Blackbeard's treasure is buried somewhere on Ocracoke Island. Luv how you built in the Spotswoode aspect. Hallow-storians will get a kick out of that for sure. Splendid. You can be my SR next year! ;)
It sucked that I had to say Rasterbator on the video, heheh. Then I was afraid it would get a profanity flagging on YouTube. heh.

Blackbeard's real story was fascinating to read. Especially the lore of his skull being used as a drinking glass. Here's a link to the story if anyone's interested: http://www.history.org/foundation/journal/blackbea.cfm

Very nice work Terra! I love your attention to detail. I see that I need to add a dremel tool to the Christmas list. Thanks for the tut!

PB
You won't regret getting a Dremel. One of the most go-to tools I haver short of the power drill. The Multi-Max tool I haven't found many uses for... yet.

AAAAAAH!!! You cleaned it up a bit with a Dremel afterwards! I thought using that electric chisel seemed rougher and more aggressive than what your results looked like, but using the Dremel to smooth it over carefully is what I was looking for. NICE.

Damn fine work, as always!
You're welcome. If you don't have the multi-Max Dremel, you can still get the same look with just the Dremel. Just takes a bit longer.
 
1 - 20 of 46 Posts
Top