Halloween Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter #1
For years, my motion props could not detect trick or treaters walking by in the low light. This solution will help you bypass those sensors.

This LED flashing kit is connected to the prop motion sensor wires and a 9V battery and continously keeps the device operating until you disconnect the battery.

Aug 2013 007.jpg

Here is what comes with the kit and what you need.
Aug 2013 008.jpg


Aug 2013 016.jpg

Here's the kit you'll need
Aug 2013 010.jpg

Aug 2013 009.jpg
 

·
Human Candy Shovel
Joined
·
1,107 Posts
I assume this is the Velleman flashing LED kit from Radio Shack,since your photos don't really include anything to identify like a product SKU or anything.

If you're buying in quantity, they can be had from Fry's Electronics for $3 per kit.

How exactly do you go about wiring it in as a motion sensor bypass?
 
1 - 4 of 4 Posts
Top