Halloween Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
179 Posts
Discussion Starter #1
I'm pretty sure I know the answer, but I want to check here first.

I want to do a straightforward popup and have a 2 way solenoid. The prop will reset under it's own weight (the air can escape from the second inlet on the cylinder). I the 2 way solenoid ok or do I need a 3 way?

Thanks!
 

·
Registered
Joined
·
91 Posts
The air will want to escape using the same route it took going in, so in order for the cylinder to reset, you will need either a 3 way valve or an outlet between the valve and the cylinder.
 
1 - 2 of 2 Posts
Top