Halloween Forum banner
1-20 of 31 Results
  1. Halloween Props
    One of the lights in my creepy pop up girl is off and I am trying to see what the issue is. I pulled the led off the wire so I could replace it, and now I'm confused. There is a green and orange wire, which one is positive and which is negative. If anyone knows, could you please reply. Thank you!
  2. Halloween Props
    Hello! Recently I opened up my Dead Eye Drake to do some repairs, and I came across this horrific wiring in the head. The LED lights are wired to the mouth motor. The power coming from the board to the mouth comes from the orange and brown thicker wires that are together. You may be able to see...
  3. Halloween Props
    I bought a PIR sensor from Ebay/aliexpress, comes with 3 wires : brown, blue and red now i want to connect it to my Picoboo FI-104S for it to activate when this is movement but i can't figure out how to connect and make it works. I have tried connecting all 3 wires in all possible ways of the...
  4. Halloween Props
    I recently had a conversation with a friend that works at a custom lighting company. Some of her lamps have plastic candles. She has been throwing away the extra ones. She just gave me my first batch of the leftover candles. They already have factory candle wax drips on them. They also come with...
  5. Coupons, Discounts and Promotions
    Stock up on all your favorites during our largest sale of the season now through April 12th & enjoy FREE Standard Shipping! 20% OFF Hitec Servos 30% OFF Futaba Servos 75% OFF Futaba Style Wiring & Extensions 30% - 60% OFF Actobotics 40% - 63% OFF Motor Blowout and gears, sprockets, hubs...
  6. Halloween Props
    EDIT: For those of you coming to this thread for the first time, please take the time to read all those who made comments following. There really is a great deal of information that everyone should know before using Eagle Eye LED lights, and most of what you need to know is provided not be me...
  7. Halloween Props
    Hello, I'm trying to build a new trigger (timer and/or motion detector) for my small fog machine (110vac). It initially had a wireless trigger device which plugged into a 3-conductor connector at the rear of the machine. The device has failed. I've been looking at the schematic for a while...
  8. Member Introduction
    Hi New member from Toronto. Seeking help on fixing my Howler Werewolf. Wiring has been disconnected from switch
  9. Halloween Props
    I have several store props that are a mix of sound or motion triggered. All are powered by AA batteries. They are near each other, and I'd like trigger them simultaneously via PIR. I happen to own a 12V 4CH Channel Wireless Remote Control Switch. Is there any way to connect the props to the...
  10. Halloween Props
    Hello, I recently purchased a Helga the fortune teller MR124150 off a local for sale forum. The prop is complete but the previous owner removed the plug in wiring pins from the circuit board to disassemble for storage. I was curious if anyone has this prop and can take a picture of the circuit...
    I have been searching and reading on the forum for a while now and I found how to use the HF driveway alert to trigger sound activated props and also infrared activated props but I'm not exactly sure how to wire from PIR driveway alert to the step pad plug . Could someone please help with this ...
  12. Announcements / Press Releases
    We're EC-STATIC about our Wiring SALE !!
  13. Announcements / Press Releases
  14. Halloween Props
    Hey all, hoping someone will have an idea on this. My wife picked me up a couple flickering "fluorescent" light fixture props from Big Lots, got 'em for cheap. They're battery operated and sound activated. I would like to "hack" them so they will stay on and NOT be sound activated. I was...
  15. Halloween Props
    Many new things this year. Most videos play a day after Halloween to not spoil the new entries. All control panels are new this year and a 5th will be a walk through. Figured I would walk people though control panel wiring. This is a little bit for the advanced haunter working with relays. Can...
  16. Member Introduction
    Heya, I'm Willie and I'm from Australia I LOVE costume parties, and even though Halloween isn't really celebrated here, I'm going all out with my first ever haunt. I've been trawling the net for months to find ideas and creations and all links lead here! I'm loving all of the tutorials, but...
  17. Halloween Props
    Our outdoor display uses a combination of LED spotlights and Tiki Torches. I picked up an additional 4 yesterday for $5 at a yard sale. We love 'em, because they're cheap, need no wiring and give off a rather creepy, flickering orange light. Anyone else here using these?
  18. Halloween Props
    The wife asked me to paint the living room. I found termite damage and it turned into a Halloween project. I was able to perfect my prop control wiring. I now have 112 pairs of audio, video, and low voltage wires going outside. Yay for termites! http://www.snydercentral.com/LR2017/LR2017.htm
  19. Halloween Props
    Hi, We have set up our Halloween Display for this year but several of the animated props both large and small, are not working properly. All animations are triggered per "Try Me" Buttons with wiring run from the various props to the picket fence which runs the length of the front of the...
  20. Halloween Props
    So this year I want to finally add the unliving portrait to my haunt, however, would I need 3 separate screens for each frame? If anyone has done this can they help me an maybe show me the wiring if possible.
1-20 of 31 Results