Halloween Forum banner

tube

  1. Mechanical: Flying reaper help needed

    Halloween Props
    I'm sure most of us have seen the flying reaper scare on You Tube. I know he used fishing line and a hexacopter. I want to do This same scare on a much lower level; using a premade lightweight ( 4oz.) Reaper decoration. I am sure I won't need a $1000 hexacopter for his stunt . What would be...
  2. Soggy sonic tube

    Halloween Props
    I made my skull towers out of sonic tubes , it has rained non stop Lately . My tubes are soggy I don’t have time or money to make make new ones..will they dry out ? I put them in the garage, will that help ?
  3. Fog: Chauvet Blinking Blue Light of Death

    Halloween Props
    Ok someone here has to have had this problem with the POS Chauvets. I have a 1200 that puts out fog (dense fog for like 6-7 seconds) then blinks blue for 1 min then does same thing I know it is reading the tank as empty, its full Already cleaned with fluid twice Power cycled several times...
  4. The Skabs Halloween cd

    For Sale By Merchants
    Hi spooky kids, its Miss Halloween here! I wanted to share with this group that my band The Skabs released a cd called Halloween, it contains 11 original tracks of nothing but Halloween themed songs! The album is KILLER! you can check out a track on you tube...IF anyone is interested in...
  5. master gracy tapestry from Disney world question

    General Halloween
    silly question.... I bought this two years ago. aside from the main metal support tube and finials across the top it came with 6 sections of metal tube. I assume to make the material rigid along the sides and bottom. but damned if I dont see any holes to insert these tubes into. what am I...
  6. Need help finding a Styrofoam tube

    Halloween Props
    Looking for some help. I am trying to find something like the cylinder in the picture. It's an 8" (200mm) outside diameter tube (must be hollow inside), ideally Styrofoam but thin cardboard would work too. It needs to be light-weight because it's being spun by a small motor at around 1300rpm...
  7. Fog machine tubing insert

    Halloween Props
    I was renovating my fog machine and on the end of the tube that hangs in the fluid reservoir, there is a metal piece inserted into the tube. Is that thing necessary? I didn't put it into the new tube and the machine is working, but there is a bit of liquid fluid dripping out the end of the...
  8. Easy Stone Pillar Props

    Tutorials and Step-By-Step
    I made these this year for my cemetery entrance gate, but you could probably use them for anything you want! Storage is an issue, so I wanted something with a slimmer profile and a lightweight design that would hold up well! I started with an 8' section of 8" builders tube, and cut it in half...
  9. Want to buy spirit halloween animated grave digger

    Wanted to Buy
    Hi, Added a new cemetery section to our display this year and would love to locate a new (or used) Grave Digger. Spencer had this prop on line and so did Spirit Halloween, also Amazon.com, but I am seeing "sold out" and "unavailable" at every turn. This prop was made by Tekky, and I believe...
  10. Fogger - Fog Juice Replacement Tube Part - Help

    Halloween Props
    Hello Everyone! I am seeking your help. I have 3 Spirit 400 Watt Ground Foggers that have recently had the tube from the fog juice tank to the pump chewed upon by mice in my shed. (I know, I know...I should have boxed them up but I got lazy last year, good news is the mice have been safely...
  11. Atmosphere Effects: Witch lanterns

    Halloween Props
    Still have more to make but have a few done so far. Some will hang in trees and others will be placed in the front yard scene and in the haunt itself. I followed SK Austin's You tube tutorial and they really came out pretty good! Halloween How-To - Witch's Lanterns - YouTube short video...
  12. 199 halloween related music videos on you tube.

    Halloween Music
    Here's my own Halloween mix with over 199 videos of Halloween related music from old to new, heavy metal to soul and just about everything in between. Please be advised that some are not kid friendly so you will need to check through first. Hosted on you tube. All still available at time of...
  13. mini mini ground LED spotlight

    Tutorials and Step-By-Step
    A little spotlight design I came up with that has a little twist compared to a lot of others I have seen. First off the materials! 12v pre wired 5mm LED's. (I got a 50 pack of different colors off of amazon for $8) 1/4th inch PEX tube (Sold next to the PVC pipe at home depot, $3 for a 5ft...
  14. Harley Quinn Mallet (from last year)

    Halloween Props
    Hey! This is a list of what I used and I will try to give you a rundown of what I did plus a final photo of my mallet. I got a pvc pipe sort of like this http://www.lowes.com/pd/Charlotte-Pipe-4-in-x-10-ft-Sch-40-PVC-DWV-Pipe/3133049 I would take your daughter with you so that she can help...
  15. Fog: Best tubing for dispersing fog?

    Halloween Props
    Part of my set-up involves a fogging barbeque, but I'd like to be able to set up the fog machine a bit farther away this year and have the fog pumped in through a tube. I've seen this down before here, but when I tried a few years ago it seemed like the plastic tube got super hot right away and...
  16. Fog: Fog Machine Not Working - Missing Piece?

    Halloween Props
    Hi All, My fog machine is not working anymore. The only thing I can think of is that the little white plastic filter part on the end of the feed tube that goes into the juice tank is missing. Must have been thrown away by accident last year when putting away the Halloween stuff. Does this...
  17. Static: Prop pvc tube

    Halloween Props
    Hello i'm french I would like to create a prop with pvc tube and let me know if you had pictures of the prop structures PVC and what kind of mask set for a head Thank you
  18. Spitting werewolf help

    General Halloween
    I was wondering if anyone has a spitting werewolf out there that might be able to help me out. I finally decided to drag mine out after 2 years and he doesn't seem to be spitting. I bought him at the day after sale so I never tested him as I couldn't return it anyway. I am wondering if I'm...
  19. Prop Showcase: My Drop Window Prop (Stiltbeast Studios)

    Halloween Props
    Second year I have been in charge of the haunt at my son's elementary school. Saw this prop on a You Tube video of Hellmouth Halloween and had to look for instructions on how to build on. In fact we built two drop panels following the instructions from Stiltbeast Studios on You Tube. Probably...
  20. Other henna

    Halloween Crafts
    i thought it would be cool to learn how to do henna tattoos halloween flairs so my very first one this is with the paste when it flavkes off will take another pic, i dig it going to buy more and practice on me , family and friends the next ones will be better for sure first tube and learning...
Top