projection

Hello! I've been a lurking member here but never posted. The tutorials and information here is fantastic, and I thought I'd share what we do for Halloween. Many thanks to @Icepick and @spiney99 for their tutorials and examples. I run 4 or 5 different scenes the whole month of October...

I know this has been asked tons of times but no one ever comes back and say what worked the best for them. I have a opening of 7'x14' to cover. I was thinking of using this Carl's Gray Rear Projection Film - Rear Projector Screen Material (Low Light, Rear Projection) I could make a frame and use...

Background In November 2016 I bought a used NEC MT 1060 projector (2,600 lumens, Native Resolution 1024 × 768 XGA, Aspect Ratio 4:3) on eBay for £70 and it is the first projector that I’ve used. I had intended to use it for projecting onto a window for Halloween 2017 I but didn’t use it until...

Not seeing a banner for the new weekly sale yet but in looking through some of the projection titles saw that Eerie Eyes Collection's Spooky Eyes projection is 1/2 off (was 5.99, now 3.00). Not sure how long this price is good for as it seemed to be an unadvertised item at this point...

Hello all - I finally am getting around to posting a brief video of last year's setup. This was taken the night before Halloween and does not have footage of the massive amounts of fog we put out and the hundred of kids that showed up. I also should have pulled the car out of the driveway before...

Last Halloween I created this animation of a bust of Poe reciting "The Raven" I never used it. I was going to project it into a graveyard and have Poe appear and talk, a-la the Haunted Mansion Singing Busts. If anyone here wants to use it, please be my guest. you can copy and use it free from...

Has anybody ever used, or has considered using, a caged IBC (Intermediate Bulk Container) tote as a projection booth for house projections? For those that may not come across the term IBC it’s normally a caged plastic tank on a pallet and the usual capacity is 1,040 litres (229 imperial...

I find I keep on updating these guys. This took me 6 tries but this version is my favorite by and I tried to make them just like the ones in the mansion on a small scale. I don't have much pictures of how i made it but Ill be updating the tread when I take some pictures. I will say the builsd...

I am hoping to get a head start for Halloween 2019. We have started to gather material, plans and concepts for the following - but we are already stuck! Here is a brief overview: The garage is gutted and going to have 3 individual peppers ghost illusions, synced to music. From left to right: 1)...

I'm thinking of doing a full projection mapping project for our house for 2019 Halloween. I used an AtmosfearFX projection into a window for 2018 and want to go bigger for 2019. My current pojector is an NEC MT1060 (2,600 lumens, native resolutipon of 1024 x 768, aspect ration of 4:3 and throw...

Couldn't put much out with steady rain all day and night - so I relied heavily on lighting and lots of movement. Used my Shiatsu's to "float" jack-o-lanterns in the upper windows and move my old scary lady in her antique wheelchair under cover of the porch. Had my fogger near the skellie...

This is the mapped projection we will have showing on the garage area of our house this year. Its about 15 minutes long. There's several AtmosFX videos with some altered to our liking along with other scenes. Hope you like it.

Does anyone know where I can get a Harry Potter window projection? Or how I can make one?

Hello, I want to create a Hologram of the witching Hour in the middle of the office but need any advice on how to place the projector so eliminate the bleeding of the image in a wall or ceiling.

Hey guys I seen a post here about window projector material but I don't want to use a sheet. Also someone said NOT to use a frosted material. Im thinking of a white translucent vinyl, would that work and does anyone have some links to amazon for brands they have tested. I hate the effect the...

Hello, foolish mortals! Last year I decided to recreate one of my favorite shows at the Disneyland Resort, Halloween Screams, and thought that you all might want to see it (better late then never, right?). I plan to finish an axeworthy ghost type setup of the Zero dog from Nightmare Before...

I want to do a "open air" Hollusion, meaning just out in the yard. I assume I need to two stakes that I'll paint matte black and then attach the Hollusion matierial to the stacks. On AtmosFX website they say a little bit of ambient light BEHIND the Hollusion screen makes it look better. But...

Hey there! I am looking for a cheap projection material to do a REAR projection in our third stall. It is a standard single stall garage door. I am in MN, so between weather and a street light, have decided to do rear projection. I have a business class Epson that will work great and plan on...

https://www.facebook.com/liby.pil/videos/1514489045344795/ this is going around facebook and getting quite a bit of attention!