Halloween Forum banner
mount
1-18 of 18 Results
  1. Halloween Props
    I want to add some climbing skeletons to my house this year. I've seen tutorials on how to hang them on aluminum siding with Christmas light clips. I have cement board siding on my house which is not as forgiving as aluminum. I could probably find a plastic clip that I could slide underneath the...
  2. Tutorials and Step-By-Step
    OK here is the promised tutorial on the cheap talking skull build. I'm trying to create a talking skull, that will react to any audio file you run through it, for less than $30... The first step was to cut the skull in a way to get access to the inside in a way that viewers couldn't see the...
  3. Halloween Props
    Picked up these last year from HD and was inspired as our house has a cemetery theme. I wanted to mount them on the columns on either side of our front door so I cut the back of the skulls off using a jig saw and then epoxied a piece of wood towards the top to act as a mount. Originally they...
  4. Halloween Props
    I had this problem last year, probably going to have it again. How does everyone keep your projector stable? I have two in the garage that need to go vertical and I have a hell of a time getting them to sit on their sides. The slightest movement will of course mess them up. I wish you could...
  5. General Halloween
    Hey all, been a while. I want to get a low cost camera to mount and film the visitors scares at my house this year. Plug in with night vision that records to an SD card is preferred. Anyone got some recommendations? Thanks
  6. Halloween Props
    We decided to upgrade our Creeper again this year. With the third Jeepers Creepers movie scheduled to come out this September it seems like a good investment. Our 2.0 upgrade was replacing the plastic, and HORRIBLE, mannequin body with a taller and sturdier fiberglass one, and the 3.0 upgrade...
  7. Halloween Props
    Hi Folks. I'm going to step it up a notch this year and use LED strip lights to illuminate the halloween trains I'm putting out. The area is roughtly 8x6. These are the ones I'm thinking about using...
  8. Halloween Props
    So i just finished up my diy paper mache bones. Mostly femurs. I want to cross two of them and mount them down my door frame. without damaging the wood frame. What is the best way to mount them. I tried to string them and do it that way but they were too heavy. i will have about 5 crossbones...
  9. Halloween Props
    I did some testing in my yard tonight and realize it will need to be mounted high, shining down on the display to look the best. At least for the spiders, I have the Fire/ice lights from last year and they have a metal bracket that I was able to remove and mount where I wanted and then remount...
  10. Halloween Props
    I do not remember where I found this skull but I bought maybe 4 years ago and FINALLY got around to finishing it's transformation into a demon skull lol. I'll mount and mud the body later this weekend and he'll be holding the candy for all the totters
  11. Halloween Props
    When looking through the forum I have seen several different ideas on how to mount wiper motors. I have found a way that works for me in every application that I have wanted to use a wiper motor for. It is quick, easy, and best of all it is really cheap. I have never seen another thread with...
  12. Halloween Props
    I have an idea but I'm not sure where to look for a remote. With the owners love of zombies I'd like to be able to shoot at them. My theory is if I can find a control box to power four different points independently we could do just that. We could hide 4 e crackers in certain locations and mount...
  13. Halloween Prop Building Group
    Hi all. I'm about to make my first attempts at sculpting with Monster Mud and I have a question: Does it stick to itself, so that I can create a piece in multiple steps, or do I have to use it all at once? For example, if I wanted to create, say, a scarecrow figure. Could I work on putting...
  14. Halloween Props
    Here is one of the new props I built this year. I built it over the weekend but need to do some improvements. I used a foam pumpkin but it is too small so I will have to get a bigger real one today and carve it and mount it. I also think it needs fuller shoulders and bigger branches for the...
  15. Halloween Props
    Is it possible? I want to mount a skeleton to one, but they spin so slowly. Any suggestions?
  16. For Sale By Merchants
    Battery Mount C provides a clean and simple way to attach a 4-cell AA battery tray to your Actobotics structure. Simply snap the mounts into the aluminum channel as shown below. Place your battery tray inside the mount and secure the tray by stretching the included o-rings over the mount...
  17. For Sale By Merchants
    The Channel Snap Mount A provides a quick and simple way to attach various Actobotics parts to your structure. Simply snap the mount onto our aluminum channel as shown below - it’s that easy! Made from 1/8” thick Delrin, the mounts are both lightweight and very sturdy. By incorporating our...
1-18 of 18 Results
Top