Halloween Forum banner

controller

  1. Lighting FX – sound activated lamp controller – by 13 Transylvania Ave.

    For Sale/Trade By Individuals
    Lighting FX – sound activated lamp controller – by 13 Transylvania Ave. This is a simple yet extremely versatile light controller! It has so many applications: • Illuminate a Halloween prop timed to a soundtrack scare • Create a thunder & lighting storm effect by using a strobe light for a...
  2. FS: Frightprops Pop Blaster + PicoBoo ONE controller + motion sensor

    For Sale/Trade By Individuals
    his is a great scare in a place where guests feel "safe" - startles them every time! $410 new - why buy new? Excellent condition - easy to program - works great! Needs an air compressor. Posting it cheaper here than on ebay (but it is listed there too) - $275 + shipping
  3. Mechanical: PMW Pulse Motor Controller + Recorder

    Halloween Props
    I'm going to build a "Monster in a box" prop this year. Actually it will be a "Monster in a Coffin" but the effect will be similar. I want to use the prop controller from Monster Guts in my title. I don't want the controller however to be triggered, but to run continuously on a loop. Fright...
  4. Hacked Squawkers McCaw Pirate Ready to Run for sale

    For Sale By Merchants
    Just finished this special version Squawkers McCaw Pirate. He's already been hacked with my SQUAWKER TALKER controller and attached on top a genuine PYRAT RUMS barrel with the controller mounted inside. Parrot is in great condition as well as the barrel. The wiring connections inside the parrot...
  5. Electronic/Software: My Squawker Parrot for 2019

    Halloween Props
    First Prop done! Probably going to get some better audio but that's my first attempt to create parrot talk. https://www.youtube.com/watch?v=cOulBrC7AoQ https://www.youtube.com/watch?v=GVNiWc-j2_g It's a Hasbro Squawkers McCaw FurReal Friends parrot. You can buy them on Ebay. Just make sure...
  6. Lighting: Changing portraits lighting question?

    Halloween Props
    I want to light my Haunted Mansion portraits with an external light, then also have the internal lights that give them the changing portrait effect light up via a lighting controller soundtrack, can this be done by using a prop controller such as a picoboo or arduino? As of now I have just...
  7. my haunted cemetery 2018

    General Halloween
    My haunted cemetery on halloween night. We didnt get as many trick or treaters as we hoped (and ironically I did all this to try to attract more trick or treaters to our street.) Also, I had a fogger but the controller is wired to it and I didnt have a remote. So I had no way to generate any...
  8. Pneumatic: Questions about running penumatic hose & tubing

    Halloween Props
    So I'm doing a zombie fence shaker this year and it's my first-ever pneumatic prop. I got an 18gal compressor off Craigslist and will have that 50ft away so hopefully the noise doesn't ruin the rest of my scene. Connecting with a 3/8 inch hose to this flow control connector. Controlled by a...
  9. Electronic/Software: Ardurino queston

    Halloween Props
    Hey all. Trying my hand at DIY props this year. Looking to go Ardurino over Pico as it seems to be less expensive. So, sorry if my question is too vague or open ended. Basically I'm doing an human interactive electric chair with electric sander, vibrating motors, flash cracker and routed fog...
  10. Fog: Fog Machine timer

    Halloween Props
    Hi Forum, i recently got an el-cheapo fog machine (220V) to use this year for halloween - it has a wireless remote etc.. but i was seeking a timer remote (so i can leave it to do its fog stuff) its fitted with a 3 pin XLR but most timers are 5 pin- so a bit lost- given its 3 pin i cant...
  11. Electronic/Software: Loud Linear Actuator

    Halloween Props
    HOLY COW This linear actuator is so loud. Are they all like this or did I just get a unusually and ridiculously loud one?? As well I attached it to a picovolt and it goes soooo sloooow. I cannot control the speed at all. It came with it's own controller but not a power source so I used my...
  12. Electronic/Software: Controller repair/direction

    Halloween Props
    I have a spirit Halloween animated prop and by accident used the wrong power supply which appears to have killed the voice but all the facial movement all work fine. I'm able to open the controller and wondering if the over load only killed the speaker which i can get and change or is there a...
  13. GIANT SALE - 25% Off Servos, 30% - 60% Off Actobotics, 65% Off Extensions & More!

    Coupons, Discounts and Promotions
    We're celebrating National Robotics Week with our second largest SALE of the year including FREE SHIPPING on orders $75+ and: 25% Off Hitec Servos 10% - 15% Off Futaba Servos 65% Off Servo Extensions 30% - 60% Off Actobotics https://www.servocity.com Not only are we having a massive sale...
  14. 15% OFF Entire Site @ ServoCity!

    Coupons, Discounts and Promotions
    Valentine's Day is around the corner so we're showing our appreciation for our customers with 15% OFF our ENTIRE SITE February 14th - 15th ! Use discount code: ILoveDiscounts https://www.servocity.com
  15. Other: new prop controller

    Halloween Props
    I treated myself to a new prop controller. Merry Christmas to me! 16 sets (one to scare and one to reset) of push button controlled 12VDC or 24VDC triggers. It may be the coolest looking one on the block. Over 250 feet of wire crammed into that box. See the amazing test video of lights turning...
  16. Looking for interest in a Try Me Button prop controller

    General Halloween
    I've developed a circuit board for super easy triggering of any prop that has a "Try Me" button. The controller is touch programmable via a single button for duration of the prop's sequence and also a post delay that will prevent re-triggering until the delay has expired. There's a single LED...
  17. New PWM Meter & Low Voltage Cutoff Switch

    For Sale By Merchants
    PWM Meter - $19.99 https://www.servocity.com/pwm-meter Need to know what PWM signal your receiver, robot or servo controller is sending? Simply plug in our PWM Meter to see a readout of the PWM signal in microseconds (µsec). If you wish to pass that signal on to your servo or device, just plug...
  18. Electronic/Software: Video of my 2017 Setup

    Halloween Props
    2017 is my first year to go all out on decorating. Major additions/highlights include: 1) Custom made fence (biggest project by far) 2) Lights Alive FireFly FF-351 controller with a pair of ProLight 400 LEDs (outdoor speakers mounted on each side of the house) 3) Grandin Road Giant skeleton...
  19. Mechanical: Need some advice/help with a AXWORTHY flying ghost project :)

    Halloween Props
    Hi there I am working on a AXWORTHY flying ghost project right now and need some advice/help on what I should get for a motor and speed controller? I found this set of motors on Amazon...
  20. Electronic/Software: Octobanger build (more of a fourbanger)

    Halloween Props
    I thought I would throw out a few pictures of the Octobanger that I recently built. The build was kind of based on the LOR lighting controller and so far I have been very impressed it. Never mind the feet looming in the first picture....:rolleyes:
Top