Halloween Forum banner

Making the hearse easy to store has been at the forefront of our plan-as-we-go approach. It is about the only thing we know is essential to the buildi
Back to setting the light fixture onto the face plate. Wires are feeding into the hole and out the other side (inside the hearse)
Oh - forgot this shot -- a view of how we made the angled foot rest. H Depot sells these cool angle thingies that are used in deck building. They are
Just showing a shot of MysterE drilling the hole for the light wiring on one side of the carriage.
Making the hearse easy to store has been at the forefront of our plan-as-we-go approach. It is about the only thing we know is essential to the buildi
This shows that same bolt from the top. Notice the washers. Also - there will be at least four of these - one at each corner of the top where it attac
Attaching the lights -- after installing some wood trim that is wide enough to hold the lights on each side of the carriage - MysterE drilled the hole
Feeding the wires form the back of the light fixture - through the hole in the wood and then screwing the fixture to the face plate.
HallowSusieBoo

Making the hearse easy to store has been at the forefront of our plan-as-we-go approach. It is about the only thing we know is essential to the buildi

Report
Watch Add bookmark
SapphyreMoon

·
Registered
Joined
·
153 Posts
Very nice setup and costumes!
 
Dr. TerrorEyes

·
Registered
Joined
·
450 Posts
Nice job!!!!!!
 

Media information

Album
PART 2 - The Hearse Goes on....and on ... and on...
Added by
HallowSusieBoo
Date added
View count
101
Comment count
3
Rating
0.00 star(s) 0 ratings

Share this media

Top