Cut off the end of the spine and insert a 25 inch piece of 3/4 inch pvc and screw it into the backbone.

Drill holes on each side for the femurs to attach at the pelvis. Use wire to secure the femurs to the pelvis.

Cut femurs in half and insert a 16 inch 3/4 inch pvc, screw down to secure.

Drill a new hole into what was the back of the blucky pelvis. This makes the pelvis look more natural.

Cut off the end of the spine and insert a 25 inch piece of 3/4 inch pvc and screw it into the backbone.

Start by cutting out the sections between the ribs.

Cut off the end of the spine and insert a 25 inch piece of 3/4 inch pvc and screw it into the backbone.

alucard
Oct 6, 2009

Watch Add bookmark

SapphyreMoon

· Registered

Joined Oct 19, 2004

·

153 Posts

Oct 14, 2009

You got a great deal.